picture
About Me
Courses Taught
Professional Bodies
Research Projects
Publications

About Me

Full Name:
JAWAID I. INAYAT-HUSSAIN, ASSOC. PROF. DR.
Email:
Jawaid@uniten.edu.my
Contact Number:
03-89212020 Ext: 7318
Department:
Department of Graduate Business School

Academic Qualifications

  1. Ph.D. in Mechanical Engineering, Kobe University, 2001
  2. M.Eng. in Mechanical Engineering, Universiti Teknologi Malaysia, 1993
  3. B.Eng. (Hons.) in Mechanical Engineering, Universiti Teknologi Malaysia, 1989

Working Experiences

Position Place of Work Start End
Associate Professor Universiti Tenaga Nasional 2008 2020
Senior Lecturer Monash University Sunway Campus 2001 2008
Senior Mechanical Engineer Tenaga Nasional Research & Development Sdn. Bhd. 1996 1997
Research Assistant / Research Officer / Tutor Universiti Teknologi Malaysia 1989 1995
Researcher Politecnico di Milano 1995 1995

Courses Taught

  1. EPRM540 - Thesis
  2. MEMB123 - Mechanics I: Statics
  3. MEMB224 - Mechanics II : Dynamics
  4. MEMB233 - Mechanics II: Dynamics
  5. MEMB3034 - Mechanical Vibration
  6. MEMB343 - Mechanical Vibrations
  7. MEMB443 - Mechanical Vibrations
  8. MESB333 - Engineering Measurements & Lab
  9. METM543 - Noise and Vibration Control
  10. MPRM562 - Research Project
  11. MPRM572 - Research Project

Professional Bodies

  1. Board of Engineers Malaysia: - 1997
  2. Engineering Council UK: - 2009
  3. Institution of Mechanical Engineers UK: - 2009
  4. The Institution of Engineers Malaysia: - 1996

Research Projects

  1. A Novel Method for Damage Detection in Industrial Machines Based on Nonlinear Feature Extraction
  2. Fundamental Research on the Instability of Journal Bearings
  3. Fundamental Research on the Utilization of Chaos Theory for Diagnosis of Malfunctions in Rotating Machinery
  4. Optimum Dynamic Characteristics of Elastomeric Dampers for Machinery Vibration Control

Publications

  1. Azrul Abidin Zakaria, Mr., Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Stability Of A Rigid Rotor In Journal Bearings.; Proceedings Of The Regional Tribology Conference, Bayview Hotel, Langkawi Island, Malaysia, 22-24 November 2011.; pp. 289-294.; 01 Nov 2011; Conference Proceeding; None
  2. Azrul Abidin Zakaria, Mr., Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Stability Of A Rigid Rotor In Journal Bearings; Engineering E-Transaction; ISSN 1823-6379.Vol. 6, No. 2, December 2011, pp 191-196.Online at http://ejum.fsktm.um.edu.my; 01 Dec 2011; Journal; None
  3. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Bifurcations In The Response Of A Rigid Rotor Supported By Load Sharing Between Magnetic And Auxiliary Bearings.; Meccanica; ISSN: 0025-6455 (Print), 1572-9648 (Online).Volume 46, Number 6, December 2011, pp. 1341-1351.DOI: 10.1007/s11012-010-9395-8. ; 01 Dec 2011; Journal; ISI
  4. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Determination Of Correlation Functions Of The Oxide Scale Growth And The Temperature Increase.; Engineering Failure Analysis; ISSN: 1350-6307.Volume 18, Issue 8, December 2011, Pages 1909-2344.http://dx.doi.org/10.1016/j.engfailanal.2011.08.001.; 01 Dec 2011; Journal; ISI
  5. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Nonlinear Dynamics Of Rub In RotatingMachines.; Proceedings Of The 14Th Asia Pacific Vibration Conference, 5-8 December 2011, The Hong Kong Polytechnic University.; Keynote Paper: Keynote_APVC005, pp. 39-48.; 01 Dec 2011; Conference Proceeding; None
  6. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Experimental Methods To Determine Noise In Compartment And Acceleration On Both Sides Of Elastomeric Powertrain Mount Of Passenger Car.; Proceedings Of The 6Th South East Asian Technical University Consortium (Seatuc) Symposium, March 6-7, 2012, King Mongkut's University Of Technology, Thonburi, Thailand.; pp. 158.; 01 Mar 2012; Conference Proceeding; None
  7. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Measurement Of Vibration Power Flow Through Elastomeric Powertrain Mounts In Passenger Car; Proceedings Of The 4Th International Conference On Noise, Vibration And Comfort; Kuala Lumpur, Malaysia, November 26-28, 2012, pp. 81-85; 01 Nov 2012; Conference Proceeding; None
  8. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Measurement Of Noise Inside The Compartment And Vibration On Both Sides Of Elastomeric Powertrain Mounts Of Passenger Car; Proceedings Of The 4Th International Conference On Noise, Vibration And Comfort; Kuala Lumpur, Malaysia, November 26-28, 2012, pp. 76-80; 01 Nov 2012; Conference Proceeding; None
  9. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Evaluation On The Hardness And Microstructures Of T91 Reheater Tube After Post-Weld Heat Treatment; Engineering Failure Analysis; ISSN: 1350-6307, Vol. 26 (December), 2012, pp349-354.; 01 Dec 2012; Journal; ISI
  10. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Fabricating Process And Mechanical Properties Of Elastomeric Mount; Proceedings Of The 7Th South East Asian Technical University Consortium (Seatuc) Symposium; Bandung, Indonesia, March 4-6, 2013; 01 Mar 2013; Conference Proceeding; None
  11. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Determination Of Transmissibility And Vibration Power Flow To Evaluate Elastomeric Mount As Powertrain Isolator; Proceedings Of The 15Th Asia-Pacific Vibration Conference; Jeju Island, Korea, June 2-6, 2013; 01 Jun 2013; Conference Proceeding; None
  12. Azrul Abidin Zakaria, Mr., Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Bifurcation Analysis Of Rigid Rotor Supported By Nonlinear Journal Bearing ; International Conference On Mechanical, Automotive And Aerospace Engineering 2013 (Icmaae '13); ISBN 9789674182939; 02 Jul 2013; Conference Proceeding; None
  13. Ungku Anisa Bte. Ungku Amirulddin, Dr., Tuan Ab Rashid Bin Tuan Abdullah, Ir. Dr., Jawaid I. Inayat-Hussain, Assoc. Prof. Dr., FARRUKH HAFIZ NAGI, Assoc. Prof. Dr., ABDUL TALIP BIN ZULKARNAIN, ENCIK; Modelling And Analysis Of Shaft Current And Shaft Voltage In Gas Turbine Generators To Avoid Shaft Bearing Damages At Sjsi Paka; N/A; Type :Technical Reports,Source Name :Consultancy Project Report, Volume :1, Issue No :1, Article ID :n/a, Page Start :1, Page End : 29, ISSN :n/a, Publisher :n/a; 02 Aug 2013; Other; None
  14. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Estimation Of Oxide Scale Growth And Temperature Increase Of High (9–12%) Chromium Martensitic Steels Of Superheater Tubes; Engineering Failure Analysis; Volume 35, 15 December 2013, Pages 380–386ISSN: 1350-6307; 01 Dec 2013; Journal; ISI
  15. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Measurement Of Vibration Power Flow Through Elastomeric Powertrain Mounts In Passenger Car; Applied Mechanics And Materials; Volume 471, pp. 30-34doi 10.4028/www.scientific.net/AMM.471.30; 01 Dec 2013; Journal; SCOPUS
  16. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Measurement Of Noise Inside The Compartment And Vibration On Both Sides Of Elastomeric Powertrain Mounts Of Passenger Car; Applied Mechanics And Materials; Volume 471, pp. 59-63 doi 10.4028/www.scientific.net/AMM.471.59 ; 01 Dec 2013; Journal; SCOPUS
  17. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Application Of Some Chaotic Signal Processing ToolsFor The Diagnosis Of Rotor-To-Stator Rub In RotatingMachinery; Proceedings Of The International Conference On Advances In Mechanical And Robotics Engineering, Kuala Lumpur, Malaysia, March 8-9, 2014; ISBN: 978-1-63248-002-6doi: 10.15224/ 978-1-63248-002-6-117; 01 Mar 2014; Conference Proceeding; None
  18. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Using Transmissibility And Vibration Power Flow Methods To Evaluate The Effectiveness Of Elastomeric Mounts For Vibration And Noise Control; The 21St International Congress On Sound And Vibration (Icsv21). 13-17Th July, Beijing, China; ISSN 2329-3675ISBN 978-616-551-682-2; 01 Jul 2014; Conference Proceeding; None
  19. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Simulating The Implications Of Oxide Scale Formations In Austenitic Steels Of Ultra-Supercritical Fossil Power Plants; Engineering Failure Analysis; ISSN: 1350-6307, Volume 42, July 2014, Pages 390-401; 01 Jul 2014; Journal; ISI
  20. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Oxide Scale Growth And Presumed Exfoliation In A 700 °C Or Higher Steam Condition: A Simulation Study For Future Operations Of Ultra-Supercritical Power Plants; The Journal Of Supercritical Fluids; ISSN: 0896-8446, Volume 92, August 2014, Pages 215-222; 01 Aug 2014; Journal; ISI
  21. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Application Of The Largest Lyapunov Exponent For TheDiagnosis Of Rotor-To-Stator Rub In Rotating Machinery; Aip Conference Proceedings; Volume :1621, Issue No :-, Article ID :doi: 10.1063/1.4898464, Page Start :184, Page End :191, ISSN :978-0-7354-1258; 24 Oct 2014; Conference Proceeding; SCOPUS
  22. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Diagnosis Of Blade Fault Based On Wavelet Scalogram AndBlade Pass Vibration Signature Analysis; Journal Of Vibration Engineering & Technologies; Volume :3, Issue No :4, Article ID :-, Page Start :497, Page End :512, ISSN :ISSN 2321-3558; 01 Aug 2015; Journal; SCOPUS
  23. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Diagnosis Of Blade Fault Based On Wavelet Scalogram And Blade Pass Vibration Signature Analysis; Journal Of Vibrational Engineering And Technologies; Volume :3, Issue No :4, Article ID :-, Page Start :497, Page End :512, ISSN :23213558; 21 Sep 2016; Journal; SCOPUS
  24. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Evaluation Of The Effectiveness Of Elastomeric Mount UsingVibration Power Flow And Transmissibility Methods; Journal Of Physics: Conference Series; Volume :908, Issue No :-, Article ID :012034, Page Start :1, Page End :8, ISSN :17426588; 29 Oct 2017; Journal; SCOPUS
  25. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Evaluation Of The Dynamic Properties And The Vibration Isolation Effectiveness Of Elastomeric Mounts; Icovp, 13Th International Conference On Vibration Problems29Th November – 2Nd December, 2017, Indian Institute Of Technology Guwahati, India; Volume :-, Issue No :-, Article ID :-, Page Start :-, Page End :-, ISSN :-; 29 Nov 2017; Conference Proceeding; None
  26. Jawaid I. Inayat-Hussain, Assoc. Prof. Dr.; Loss Factor Of Elastomeric Dampers For Rotating MachineryApplication; International Journal Of Engineering & Technology; Volume :7, Issue No :4.35, Article ID : 10.14419/ijet.v7i4.35.22337, Page Start :107, Page End :111, ISSN :2227-524X; 30 Nov 2018; Journal; SCOPUS